Item# AMPRF10001AAM
Infinity

Reference 10001A

Details

High performance mono subwoofer car amplifier


Variations
$429.95429.95 each
Promotions
Product Actions
Add to cart options
Availability:

This item is currently not available.

Highlights

Reference 10001A mono subwoofer amplifier delivers a blistering 1,000-Watts RMS using Class D amplifier topology to ensure cool running and minimal current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio — and Infinity includes RCA-to-speaker wire adapters so you'll make the right connections. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Know What's In The Box

Know What's <em>In The Box</em>
  • One Reference 10001A mono subwoofer car amplifier
  • Six 35A ATO fuses (3 installed, 3 spare)
  • 2 Bare wire-to-RCA adapters
  • Remote bass control module
  • 16.5' Remote control cable (RJ-25 plugs on both ends)
  • 2 Self-tapping screws for remote (M3 x 15mm)
  • 4 Mounting screws (M4 x 53mm)
  • Owner's Manual
  • 2 Infinity decals

Shop all Amplifiers

Amplifiers

Not finding what you're looking for?

Shop all Amplifiers

Product Specs, Manuals, Compatibility & Features

Documents & Downloads

The latest owner's manuals, quick start guides, and documents.

General Specifications

600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
Class D amp technology
frequency response
10-320 Hz
variable low-pass filter (32-320 Hz, 12 dB/octave)
variable bass boost (0-12dB at 45Hz)
phase switch (0, 180 degrees)
wired remote level control included
preamp inputs and outputs
speaker-level inputs (speaker wire-to-RCA adapters included)
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
fuse rating
35A x 3
WxHxD=320mm x 55.5mm x 180mm WxHxD=12-5/8” x 2-3/16" x 7-1/8”

Features

Compact size

The Infinity Reference 10001A amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.

High and low level input

Speaker-level and low-level inputs allow the Reference 10001A to integrate with both aftermarket and factory car stereo systems.

Variable crossover and bass boost

Unlike many amplifiers available at similar prices, the Reference 10001A features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.

Low noise and distortion

The Reference 10001A has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise.

Input Level Control

When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 2.0 Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.

Full on-board protection

On-board circuitry protects the Reference 10001A from shorts, high-temperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.

Phase Switch

This switch changes the input phase to inverted or noninverted.

RBC wired remote

The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver's seat.

Product Support

1.800.553.3332

  • Sales and pre-sale assistance
  • Technical help
  • Parts and accessories
Sharing